Product

Product - Hydraulic separation cone

Hydraulic separation cone

Product Introduction:

VórSep vortex separator is a high effective solid-liquid separation device.

The separator can be integrated to grinding machine without removing existing coolant filtration system, and this will lead to friendly installation and operation conveniences.

After installing solid-liquid separation,the separation device itself is almost maintenance-free,reduce grinding and cutting operation costs,at the same time provide stable filtration performance。

Feature

1 Provide appending or stand-alone unit option for installation to existing coolant filtration system.

2 Not necessary to modify grinding or milling machine’s coolant filtration circulation system.

3 Easy discharged slurry management.

4 The vortex separator body is made from stainless steel.

Hydraulic separation cone

Model

VórSep 30

VórSep 40

Filter capacity (l Min)

30 ~ 35

40 ~45

Inlet hole size

Ø 3/4”(BSPT)

PT 3/4”(BSPT)

Drain hole size

Ø 3/4”(BSPT)

Ø 3/4”(BSPT)

Outlet hole size

Ø 3/4”(BSPT)

Ø 3/4”(BSPT)

effectiveness

99%, < 25 μm

90%, < 20 μm

99%, < 25 μm

90%, < 20 μm

 pressure

1.5 ~ 2.5

1.5 ~ 2.5

Material

SUS304

SUS304


Solid/ liquid Separation Performance

With 7% water base machine coolant mix with 1% SiC solid particle powder while the working pressure is about 2.0 Kg/cm2(0.2 Mpa), the maximum particle size was detected around 3 micron meter (3000 nm) in clean filtrate, but the condition may varies since the viscosity of the slurry, or the specific gravity of solid particle may lead to different results, higher the specific gravity difference will lead VórSep to better results.